Skip to content
Step by Step Internet 🌐 Guides for learning to surf the Net

Automatic on and off What is it, how does it work and how to program it on all devices?

Automatic on and off What is it

When we are using our equipment and we want it to turn itself off and then turn on we have to do a programming, but if you are afraid to do it because, you do not know what it is, how it works or how to program it, here we show you .

We anticipate that, if you do this it will not harm your device’s health at all , because we imagine that this is one of the reasons that do not let you take the step forward to be able to do the programming.

As we are here to help you, we will explain the steps for each of the methods such as: Windows 10, Android, iOS and Mac, since if you have one of these you can help yourself right away .

Automatic switching on and off: What is it and what is it for?

Let’s just imagine that we can’t charge our phone, tablet or laptop, but we want its charge to last longer. What would we do? With automatic on and off programming, we can put our device to rest for a period of time, forcing the computer to consume little energy .

Although this not only works to extend the load of our devices, it also has other virtues such as:

  • The necessary rest for our computers.
  • If we are downloading a software and not to leave the PC on all night, or to wait for the download to finish. Only we put the automatic shutdown programming and it will turn off .
  • If we have our cell phone and we need to turn it off every day at a specific time, we can program it >.

Well, the advantages, or what is this programming for, are defined by each one of us, because we each have different reasons, although the ones we mentioned are the most common .

Steps to activate the automatic on and off on all your devices and devices

In this section you will learn how to make your device turn off and on automatically. Read the following information carefully:

In Windows 10

To be able to program the automatic shutdown of Windows 10, we have to use the options of the “Scheduler of tasks” of the system. This tool has already been incorporated into this operating system for a long time, and despite this remains unknown to many of its users . Such a tool can be very useful. As for example now, we need to schedule an automatic on / off .

In this way when we are downloading a program or something that marks its download time more than an hour, we can let it download alone without waiting for it to finish and then turn off the PC, because automatically with the programming done will turn off .

To do this, the first thing to do is open the Windows 10 task scheduler. Simply type “Task Scheduler” in the search field located on the taskbar, and then do click on the tool in the window that shows the results.

By doing this, it will open on the desktop, and we can start creating the task that we need the program to allow us, in order to choose when our equipment should be turned off automatically.

For programming we just have to click on the “Create a basic task” option that can be found in the right panel that is in the programmer. Then we will open a window with the appropriate assistant to proceed to create our tasks for the system.


Now we continue to indicate the name we want to give to the tasks set by us, for example we will put “Automatic PC shutdown” , and we can also leave a brief description to indicate that The task we have created is to automatically shut down our Windows 10 computer.

Once this is done, click on “Next” and we will see that will ask us to indicate when this task will be done . So we choose if we want it to be done daily, weekly or perhaps monthly.


To finish what we have to do is indicate the action that the system will take when the time comes, for this we select the option “Start a program” and click on ” Next ”. Then click on “ Browse ” and select the process accounShutdown.exe accordingly.

We can find this process in the Windows window under the path “ C: Windows System32″ and then we just double-click, and the task scheduler window will automatically appear.

We have to verify that everything is going correctly. Click on “Next” and then we will see a summary of everything we just did, Click on “Finish” so that the task is created.

Logically, when a computer is turned off, no action or task is executed, so if you want the computer to turn on automatically we must go to the system BIOS and program it there .

The first thing we have to do is restart the computer and enter the BIOS , and for this we only have to press the keys determined by the system. If you don’t know what it is, we recommend you try the F2, F8 or Supr.


After entering the BIOS we look for the option “Resume by alarm or Lighter by RTC alarm”, that is normally found within the “Power management settings”.

By activating this function we can indicate the time at which we want to turn on the device automatically every day . Once this is defined, we save the changes and exit the BIOS and restart our PC in the normal way.

On MacOS

In this part we will see what to do to be able to program our Mac, so that just like the previous method it turns on and off automatically. First we must go to the “System Preferences” and then to the menuEconomizer †.

We look in the upper right corner for a button that says “Schedule”, then we click and it will open a panel where we will see options like “Start” activate and a second one that gives us access to “Rest”, “Restart” or “Shut down the computer”.


We check the corresponding box, and then we establish if we are going to do it every day, weekdays, weekends or just one specific day. Then we define the start time. Thus combining both actions, for switching on and when turning off . Also from there you can determine the automatic restart of the device.

On iOS

To set a schedule on our iPhone phone, we follow all these steps below. First we go to “Extras”, there we look for the “Alarm” option, locate where it says “Sleep timer” and set the time in which we want it to go out (mostly it ranges between 15 minutes and two hours).

When we choose “Sleep Timer” , we will see a clock icon on the screen and the minutes left before the device turns off and they will appear at the top of the screen. In the case of the iPod Nano and the fifth generation iPod, the sleep timer is used with one clock at a time.

On Android

Programming the automatic on and off on Android is very easy. Although this function is not included in these devices (however the interface is standardized) and for this reason it cannot be seen in the vast majority of mobile phones or tablets. Some brands such as Qualcomm or Mediatek develop this function in their products.

If your phone comes with the function already installed and you can program the automatic on and off you will not have to search through the interface until you find the option. Since it can be found in the “Settings list”, at the bottom of the “Settings” of the system with the name of “Program on strong> and turned off•.

Once we enter the option we will find the time when the mobile will be turned on and when it will be turned off. We can change any of the two times already defined and even determine the times we want it to be repeated . But, we cannot add more hours. For example, that one day you work at a different time than the next day.

Turn on and off automatically How does it work and what does it depend on?

Automatic switching on and / or off depends on several things, but one of the most important things are the following :

The processor

The processor is a computer base that processes or submits a series of operations the information that is entered into a computer , or a mobile.

When we do an automatic on and off programming, many things influence. Among them is the processor, because here all the actions to be executed are directed, such as programming . Processors vary by manufacturer, so the ways to schedule these tasks also vary.

The battery

The battery is one of the things that we take care of when we program the on or off on our device, in order to save as much as we want, since our device must have a minimum percentage of 15% charge otherwise, the actions would not be executed .

For example, if we want our device to turn off and it has a percentage of 5% (when you turn it off or on it consumes a considerable percentage of charge), probably won’t turn on since when it’s going to run low power on will not run completely .

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.