How to activate network detection and configure sharing to increase your privacy in Windows 10? Step by step guide

Security and privacy are one of the most important factors currently for most users, because there is a great threat through the network of suffering data theft and identities

Keep in mind that computers have become an essential tool for human beings, from them we carry out endless activities where we are frequently entering personal data and important information . In the same way, we enter bank accounts, email, social networks among others.

Due to all this, Windows 10 has tools that will help you protect each of your information so you can have greater security, in this case it is of network detection and sharing .

What is the “Activate network detection” tool? on Windows?

Network detection in Windows is one of security measures provided by this operating system which is responsible for protecting all the information found stored on the computer . It is activated every time the computer enters a private network environment .

However, this process is automatically deactivated every time we access a public network , with the aim of preventing the computer from being exposed to any type of attack or unknown unauthorized access .

This function offered by this system has different functions, such as the configuration of file sharing . This is basically about establishing a central point where other network users can access to handle any type of file, documents and printers . A very simple way to maintain access to different information only with other established users.

Why is it important to configure the «Shared use» when you enter a new network?

When we refer to enable file sharing in W10, we mainly mean that all resources will be available in the system . That is, all computers will be able to use the resources that each of them enables for their simultaneous use . All this allows other users to folders, printers, drives, Internet access.

This offers many advantages for its users , being very important in some occasions to have this type of tool. That is why here we present some of the main reasons why we should have this function:

• It allows you to copy or move documents from one computer to another very quickly and easily.
• Exchange working documents on computers different.
• A single internet point is enough for several devices to access to it.
• You can access the same device as a ZIP drive or printer from any of the machines.

Steps to activate network detection and improve security in Windows 10

If your computer is not detected by other computers in the private or public network , which prevents you from being able to share any type of element, then we recommend that you start activate this option so that your PC can enter the central point and carry out the sharing and thus improve security.

In order to activate this you will simply have to follow these steps:

• The first thing will be to enter the start menu, there we will select the option of “Settings” where we find the following:

• Here we select the “Internet and network” section.

• Now in the menu that appears on the right side of your screen, we choose the “Sharing options” section.

• In the new window that appears on the screen, in the “Network detection” section, check the “Enable automatic configuration of devices near the network” box . Then we click on the “Save changes” option and close that window.

• In this way you will be able to activate this function inside your Windows 10 computer.

Steps to configure the «Sharing» to protect your privacy in W10

There are different ways to configure your privacy within W10 , this will allow you to have sharing your documents, files and accessories in a secure way with others computers associated with your network . That is why here we present the main steps to configure each of these elements:

In files and printers

This method gives you the possibility to start interacting with other users, thus sharing different files and printers with other computers that are connected to the same system.

>

This requires that you follow these steps:

• The first thing we have to do is go to the start menu and there select accounConfiguration†.

• Next “Internet and network”.
• In the menu on the right side of your screen, select “Sharing”.

• Now we go to the “File and printer sharing ” section and select the “Activate file and printer sharing” option.
• Finally, we click on “Save changes”.

In public folders

Another of the methods we found is public folder sharing through this tool. To do this you just have to follow these steps:

• In this case, we will find the entire profile through the following route: C:UsersPublic.
• Through this route you can access each one of computers registered within the system, as well as a security folder .
• Note that it is recommended not to provide information personal or private for security reasons, since such access will be without any restrictions . For this it is necessary to perform the same steps as the previous methods.
• Now we select the “All networks” section.

• Here we go to the “Public folder sharing” section and select “Activate sharing so that all users with network access can read and write files from public folders. “ And then click ” Save changes “ to close the window.

Set password

Another way we can use to protect the entry to the content of our system data is by creating or establishing what is a access code or security password. This will prevent not everyone from entering this data, but only those users who have their credentials.

In order to set this password you will have to perform these instructions:

• Enter the start menu and then on permitted Configuration Settings.
• There we select “Internet and network”. li >
• Now we go to the “Change network settings” section.
• Select “Sharing options”. li >
• Once again we enter the “All networks” section.
• In the final part we select the box “Activate sharing with password protection ”
• Finally, we click on “Save changes”.

How to know what folders are being shared and how to stop doing it?

On many occasions we begin to share different folders with other users connected to the local or public network, arriving at a time where we do not know how much information we have offered to others. This way it is important to know the different existing methods that we can use to know how many folders are currently being shared.

There are different ways to do this, to do so follow each of these methods:

Using the Execute command

• The first thing will be to press the key combination “Windows + R”.
• There will open a new window where we write “fsmgmt.msc” and we click on equallyAccepte.

• Here the “Shared Folders” window will appear where each of the shared resources will be displayed as: the share name, type, location, connections, description, among others.

Using CMD in W10

• As in the previous step, we press the “Windows + R” keys.
• Here the “Run” window will open again where we write the following: CMD and press “Enter” or click on acceptAccept.

ul >

• Now we access the command prompt console and execute the “net Share” command.



• If you want to view the shared folders on a remote computer, use the following command: “net view” WIN-3AG9IIVJ5M3 / all ”.



Using Windows PowerShell

• In this case we right click on the Windows icon and select the “Windows PowerShell” option.



• Then a window will appear on the screen where we have to insert the following command: Get-WmiObject -class Win32_share .



• This way you will see all those folders shared on your computer.

Using the W10 file explorer

• To do this you go to “My documents” and select the option of “Network” located on the left side of your screen.
• There we double-click on the active device on the network to see the files shared on the system.

In this way you can begin to verify each of the information you have shared with other teams. In the same way, you can delete that you do not want to have there simply removing them in any of the methods explained above.