While it is true, mobile phones contain very important components that are durable over time, be they cameras, processors or screens. However, there is another absolutely essential element of these devices and these are the batteries , which are inside and unfortunately, are degrading as time goes by >.
In this sense, there are many myths and rumors in reference to this component and because of this, the failures that commonly occur with the battery of a Smartphone are of great concern for users . Since, once the useful life of this element begins to decrease and be affected, it is likely that the phone will cease to function normally normally and in fact, in no way can you get the most out of it to your terminal.
In this way, there are several tricks that allow you to keep your Smartphone’s battery safe and sound, but the best known and most effective of them, refers to calibrating this element in order to last longer than expected . That is why, next we will let you know what this procedure is about and how it works , as well as its advantages, disadvantages, all the steps to follow and as if that were not enough, the reasons more recurring reasons for disqualifying this internal component of the mobile.
Index:
What does it mean and what is the purpose of calibrating the battery? Advantages and disadvantages
Generally, when charging an Android device, there are several algorithms that the system itself runs on its own and this is based on battery capacity, charging point, charging time and other aspects, that allow to know the state of the battery of the device and with it, to verify if it is balanced.
Which means that if during any circumstance of these factors there are failures, it can be affirmed that the battery is uncalibrated. With this, we want to indicate that when saying that a battery is calibrated, it is ratified that said element is balanced and thanks to this, it manages to avoid the aforementioned failures .
Thus, calibrating the battery is for the battery indicator that contains your Smartphone, can show the real information regarding the state of charge of that element . With which, you prevent the phone from turning off when it has low battery power or that while you have it charging, it indicates that it is fully charged but it really isn’t.
Then, the process allows you to extend the lifetime of that internal component and thus, prolong the ideal operation of the device in general .
However, in addition to this, it is valuable to know the advantages and disadvantages around the procedure of calibrating an Android mobile battery , in order to be aware of everything that happens while carrying out this. Therefore, below we detail the most notable benefits and disadvantages in this regard :
Advantages
Knowing that it is a process that increases the lifetime of a battery, it is logical that it has advantages for the mobile and of course, for you.
Then, we present the most relevant:
- The readings carried out by the operating system are more accurate and therefore more reliable.
- You can make sure that the operating system will indicate a real remaining battery level . So you can take away the headache of not knowing exactly how much battery time your device has left.
- You can use your Android phone without any worries regarding the amount of battery that fits your phone . This, to know its exact percentage.
- Your mobile will not have sudden blackouts . So you can also prevent the operation of the device from being affected.
- Already you will not see freezes in the percentage shown by the Android system .
- You can prevent the ultimate degradation of the mobile battery .
- Thanks to the calibration, the battery will maintain optimal operation throughout its life and you can save battery on Android .
Disadvantages
Although it may be a necessary process for an Android device from time to time, also has several disadvantages or points that must be taken into account when deciding to do it .
>
Therefore, we have pointed out the most outstanding disadvantages and are:
- Calibrating a battery will not fix your battery instantly , especially if it already shows a certain age.
- When you just buy a mobile phone and it has problems with it dude, calibrating your battery is absolutely useless . So it makes no sense to do it in these cases.
- If you abuse these practices, it is very likely that you will negatively influence the execution of the battery and even the mobile . So it could be a bit dangerous.
How to calibrate the battery of the Android phone and make it last longer?
Before indicating the step by step to be able to calibrate the battery of your Android mobile, it is valuable to note that this procedure should only be done every three months (minimum), since you must let the same battery run its course and in case you do it every week or month, will not work at all and rather, it could affect the device.
In addition, should only be executed when you notice failures around a bad battery reading by the same Android system . Thus, the procedure is:
- To start, connect your Smartphone to the charger or you can do it with an external charger , since both tactics work the same way.
- Subsequently, wait for the device fully charge. That is, show 100% battery , so wait a while after that percentage has finished. This, in order to ensure that the mobile fully charges.
- Now, once the battery is fully charged, proceed to disconnect the device from the charger . And if you have done it with an external charger, just insert the battery into the device .
- Then, you have to take care of download the mobile completely . Which means that is time to use it until the battery is completely depleted . This step is very relevant, since forcing the phone to turn off is a key point during the calibration process. Once it reaches 1%, let the device turn itself off.
- After that, with the phone completely downloaded, you have to wait for about four hours (en an average time, but you can check the exact time depending on the manufacturer of your cell phone). Since, it is what they recommend to be able to release the residual energy it contains since the last charge . If you do not do it, the procedure will be ruined.
- When the four hours are up or the most appropriate time, reconnect the mobile to the charger or, failing that, to enter the battery in the external charger.
- Thus, expects the mobile to fully charge the battery up to 100% and as in the previous step, lets pass a few minutes after to confirm that the device is fully charged .
- Finally, disconnect your phone from the charger or reinsert the battery into it , in order to verify if the calibration process of your mobile battery was completed correctly. That is, should no longer show problems in reference to the state of charge . It’s all.
What are the reasons why a battery is descaled? Tips to last longer
Although a large number of uses of the mobile phone can cause the battery to be uncalibrated , this is a common course that the device component must follow. Since, it is impossible to prevent this from happening and therefore, calibration is necessarily necessary every so often in Android terminals.
However, there are some specific reasons that the experts themselves have pointed out as the main actions that manage to decalibrate a battery . These are:
- The most powerful is keep the Smartphone connected while the battery is already fully charged , that is, it is 100%. Since, causes a temperature increase and thereby, causes battery degradation in the short term . Therefore, it is advisable to keep an eye on the phone when it is connected to the charger, so disconnect it precisely when it contains 100% battery .
- Another cause with great power are the fast charges , which also increase the degradation of a mobile battery. Therefore, it is advisable to make use of the standard charge l, whenever possible.
- When you use wireless charging for your mobile, there is also a notable increase of temperature and that is why, it is preferable not to use the well-known induction load because although it seems harmless, it is one of the biggest causes why shortens the life of use of a mobile battery strong>.
- When you do not use the original mobile charger, your battery may be significantly affected . Indeed, it is relevant to use the indicated loader or at least have one that is certified and compatible.
Other tips to make the battery of an Android phone last longer are:
- When you just bought your mobile, it is not necessary to completely drain your battery or charge it for a large number of hours . Therefore, you do not have to worry about the first charge of this one.
- It is not recommended to make complete downloads , as this can negatively influence the performance of the device. Thus, it is advisable to keep the battery level between 80% and 30% .
- It is good that preserve the battery level of your cell phone around 40% , especially if you are not going to use it for a considerable period of time.
- Although it is not dangerous to leave your phone charging overnight, is not indicated that you connect it to the current for so many hours . Consequently, it is preferable that you make partial loads.