The channel of your WiFi signal is also known as the frequency or signal strength (Hz), through it the Internet is transmitted to your devices .
If you are in a place where there are multiple Wi-Fi signals, there may be problems when connecting to your router. An example of this would be constant disconnections or a slow speed.
For this and other reasons it is important to know how to choose a different channel or transmission frequency, to avoid connectivity problems.
Index:
How much does the congestion of a channel influence the quality of my channel? to wireless Internet?
If there are different routers transmitting on the same frequency or on the same channel, this will cause the communication network to become congested and different failures begin to occur. It is for the same reason that it is very important to observe how many devices exist near your location, and if there are many change to a different transmission channel.
This problem has a considerable influence on places where there are different signals, but transmitting on the same frequency. So this can generate different failures such as the following:
- Low speed.
- Unstable signal.
- Signal loss and reduced coverage.
- Disconnections.
- Problems to connect to the network.
Steps to identify the best channel for your WiFi with «WiFi Analyzer»
There is an application for mobile devices that allows you to analyze WiFi transmission networks and see which channels are saturated, this is Wifi Analyzer and is available in the Play Store. Once you have downloaded it, you just have to follow a series of steps that will show you below, so you can get the best channel for your network.
Run the application
When the download is complete, the first thing you should do is open it, after it starts you will see different graphics; the amount will depend on how many WiFi networks are available and within your reach. In the same way you can see the name of each one. But, usually the one with the greatest intensity is yours.
Analyze the graph shown
The program will show you a screen with several graphs, this will help you to know which are the channels with the highest saturation and the respective signal strength of the emitting devices.
Choose the right channel
If the graph is difficult to understand, don’t worry. This app has a section that tells you in a better way what are the best channels you can use for your router to transmit the signal.
It tries to identify with stars which channel is better. The more stars it contains, the less saturation it has. It is recommended that you write down the best options on paper, so that later you have identified the best option when changing.
How to change my router’s channel and set the best and least congested ?
It is an easy process to do, but you have to pay close attention when doing it. Especially because there may be small differences in the location of the options. This is due to the various existing brands in the market, so there may be minimal variations.
Follow these steps carefully:
Enter your router to configure it
On different occasions we have explained how you can access your WiFi router and how to configure it . That is why we will leave you here different links where you can observe in more detail the explanation to enter your router and correctly configure your Wi-Fi device .
However, we will give you a quick summary. To enter your router just simply enter your IP address, it is commonly: 192.168.1.1. If it fails, try 192.168.0.1. This will be placed in the search bar of your favorite browser. (In case none works, we invite you to enter the link indicated above so that you know other methods).
Once you have entered the indicated data, you will be asked to add a user and a password. If you have not configured your device at any time, the user must be: admin and the possible password can be: admin, 1234, 0000 or any other depending on the manufacturer. You can also find this information on a label somewhere in it.
Change the transmission channel
Now that you have entered, just look for the “Wireless networks” or “Wireless” section, here you can change the transmission channel. Your router may be set to automatic or on some channel.
Now just look for the paper where you scored the best available channel, which you observed using the WiFi Analyzer application. Once you have it attach that channel and press the «Save» or «Save» button. Restart the router (turn off and on) to complete the configuration.
List of the best applications and software to analyze the channels of my wireless network
In addition to WiFi Analyzer, there are other tools you can use to analyze the different networks in your area. Keep in mind that the importance of these apps lies in knowing which channels are the most saturated and which are the best options you can use. This is why the program you want to use is important.
>
Next, we will give you a small list that you can try:
WiFi Monitor – Wi-Fi network analyzer
This is a complete tool with which you can monitor as closely as possible the status of your wireless network, as well as other networks close to you. Just download it on any device so you can explore each feature.
It has custom tabs for specific functionalities. Each of them has a huge number of sections. But, the one that interests you most is that of the channels, where you can recognize which ones are saturated.
WiFi Analyzer
It works in the same way as mentioned at the beginning of the article. Although, with a more striking user interface. Like others, it has sections or tabs dedicated to a particular functionality. The most important are the graphics of the channels and the quality of those available. You can observe them with a star, the more you have, the higher quality it will be.
Although it is in English, it is quite intuitive thanks to its easy user platform and graphics.
WiFi Analyzer
Although it has practically the same name as one of those mentioned above. It is totally different, not only in the user interface that is much more striking and tidy. If not that also allows you to analyze the networks to provide a more detailed analysis of the current state.
WiFi 5GHz and how you can solve the congestion problems of 2.5GHz span>
High-frequency Wi-Fi or 5Ghz transmission networks allow faster data transmission speeds, so you will have better benefits for your devices. In addition to this they have greater coverage and a large number of channels to transmit. If the channels available on the 2.5 GHz frequency are saturated, it is best to change the frequency to a higher one.
Keep in mind that to perform this task, your router must be able to transmit on that frequency. Apart from this, the devices you will connect to it must support the new frequency. So before making any changes make sure it meets these requirements.
It is very rare for modern equipment; Mid-range and high-end, don’t meet them. But, if you have some something old or have doubts, you don’t lose anything validating that they can work properly.