Computers are nowadays one of the most used computer equipment at present, they need to work under certain operating conditions in order to ensure its optimal functioning . Therefore, being able to maintain a good CPU temperature is essential in order to maintain the optimal conditions of the equipment.
You may have noticed at some point that your CPU starts to warm up after a runtime. In general, when this happens, the equipment begins to behave strangely, either blocking certain tasks, slowing down, even getting hardware problems .
Luckily, being able to know the temperature of a CPU is a simple task to achieve. In this way, here we will teach you how to measure the temperature on your computer in a very simple and fast way.
Index:
Why is it important to constantly monitor the temperature of your computer?
Being able to know the temperature in which the computer is located is very important, since, if we can verify that it is working correctly, we can extend the life of the equipment , as well as improve your performance and prevent system failures . Therefore, to ensure that this is the case, it is necessary to perform maintenance on the equipment or perform adequate cooling and thus avoid possible damage .
Usually, the internal temperature of the computer is usually much higher than the external temperature , this is due to a large number of electricity elements that are within the CPU and over time they generate heat shedding, what is currently known as the “Joule” effect.
This is how these devices are designed to work at certain temperatures, whereby higher temperatures at longer temperatures can reach irreversibly damage the devices That is why the importance of being able to constantly monitor these factors and thus avoid possible overheating that may affect the life of the equipment.
Steps to measure the temperature of your CPU in Windows, Linux and MacOS
Given how dangerous these overheating in computers can be, here we will explain step by step how you can start measuring the temperature in your machine.
It is important to mention that these problems are often generated in the operating systems of Windows, Linux and MacOS. Due to this here we will explain how to take this process in each of these operating systems , to do this follow each of the methods we will teach you below:
In Windows
In the case of the Windows operating system , being able to know the temperature status of the equipment is very simple. For this there are a large number of programs on the market which will be in charge of giving you a very complete report of the heating of your CPU.
In this case we want to present you with free programs that are very easy to use and with which you will get very positive results. Therefore, first, we will use the Core Temp software to perform this method, to do this follow the steps that we will explain below:
- The first thing will be to install the Core Temp software on your computer (later you have the download link).
Download Core Temp Windows
- Once installed in the machine, Core Temp will show us in the taskbar the temperature in which the computer is . In this way, you can know and constantly check each of the cores of your processor, thus avoiding possible overheating.
Another of the most recommended programs to perform these processes in Windows is HWInfo , as well as Core Temp we can also download it completely for free and which offers information a little more complete and detailed than the program mentioned above .
Download HWInfo Windows
To do this you simply have to install the software on your machine and with a few clicks you can check the overheating status that has the processor, memory RAM, hard drive, graphics card, fan revolutions , among other elements.
Finally , HWInfo you can download it for free as we already mentioned, but you can also acquire your license and thus use your paid version , which will give you more advanced tools and better control on each of the elements that integrate your computer.
On MacOS
In the case of the MacOS this process is carried out in a way very similar to that of Windows , that is, it will also be necessary to use third-party applications to be able to know and improve the warm-up status of the equipment .
Therefore, here we will show you the two best programs to perform this procedure on your MacOS computer:
VitalSigns 2 or Vital Signs
The first program we present to you is about VitalSigns 2 only available for the Mac for free. With this version 2 you can start configuring each of the parameters to be monitored and at the same time have a greater customization.
Therefore, the first thing you have to do is enter your official site and perform the software download. Once installed, you will be shown in the OS side notification bar . With it you can start controlling only three variables of the equipment:
- The speed of fans .
- The use of RAM.
- CPU temperature , housing, ventilation grill and memory.
Download VitalSings 2 MacOS
iStats Menus
This is another of the most recommended programs for MacOS users , it is characterized by offering a lot of detailed information on each of the temperatures of the different components of the team . Therefore, it becomes a very good option to monitor your computer and prevent it from being affected in performance.
Once downloaded and installed on your Mac , you need to make sure that the “Sensor” is activated, you can see this from the menu bar where an icon called “SEN” appears, there you click and you will be shown all the states of the different machine components . However, it should be mentioned that unlike the other softwares this is of pag or, and has a 14-day trial period .
Download iStats MacOS menus
On Linux
In the case of Linux computers it is very important to keep these parameters in their normal state in order to ensure correct operation of each of the units of the equipment, either the processor, RAM, graphics card, among others.
Keep in mind that heating problems can be due to different factors such as deterioration in contacts, fans , among others. With this in mind, here we will show you how to monitor the temperature in the Linux operating system .
We install the libraries
The first thing will be to install the libraries which are the ones that allow to detect the different sensors that are located in the motherboard and in the processor.
- For installation we must enter the following command: sudoaptitudeinstall Im-sensors.
This process is very similar to the method to detect disk sensors hard . In this case we have to install the “hddtemp” in a terminal, the command to use in this case is the following: sudoaptitudeinstallhddtemp. p>
While the installation of the hddtemp command is beginning, we will see a series of options to choose from, here we must select the ones that are by default in Ubuntu , we write them and press “Enter.” The following question will also appear on the screen “We want to execute the command hddtemp at the beginning”, which we answer with a “Yes.”
Once we have the libraries, the following will be to make our operating system able to recognize the sensors on the device with the following command: sudosensors -detect.
Here some questions will be shown on the screen where we have to select the option recommended by the system. Note that at the end of the process you will see another question where you have to indicate if you want add the lines shown above, here you must answer Yes / No, in this case it is best to answer “Yes” so that this is done automatically when restart the computer.
Monitor CPU temperature
Once all of the above is done, the following will be monitoring the temperature through the “sensors” command. Note that you can also do it by installing Psensor, an app that is in the Software center and which will offer you the temperature graphically . To install Psensor enter the following command: sudoaptitudeinstallpsensor.
Tips to prevent your computer from overheating and extending its life
It is important to keep in mind the importance of the temperature for the life of the computer. Therefore, it is very important that we can give it the best possible handling so that prevents the computer overheats and suffers irreversible damage that could lead to stop working .
With this in mind, here are some tips so you can avoid these possible overheating and extend the life of your computer .
However, before we want to leave you a list with different temperature values and their meaning, this will let you know how the equipment is working:
- Children under 60 °: The computer is working correctly.
- Between 60 ° and 70 °: The machine still It works correctly, but is starting to suffer from heating problems . In this case it is recommended to check the fans and clean them.
- Between 70 ° and 80 °: In the case that overclocking is not being done You must check the fans to see if they are working properly, they are likely to have some kind of problem.
- Between 80 ° and 90 °: strong> If the equipment has these temperatures it means that it is suffering serious overheating problems . Most likely, some of the fans have stopped completely or have deteriorated. In the case of laptops they can reach these temperatures when they are running very heavy games and performance is lowered. Temperatures higher than 85 ° are dangerous .
- Higher than 90 °: If your equipment reaches this temperature surely will have stopped working and may have burned, causing irreversible damage in it.
Keeping this clear, here are some tips to keep in mind to avoid these possible machine overheating .
Perform good maintenance
The first thing we have to do is to constantly maintain the equipment, this consists of constantly cleaning the dust that falls on them . In general, all this dust and small wastes usually accumulate in fans and heatsinks, causing them to start working in forced thus reducing capacity of refrigeration .
The most recommended and perhaps the most important thing to prevent this, is to clean both the fans and the heatsinks every so often, for this you can use pressurized air, brushes, brushes strong>, among other elements that allow this to be done.
Increase cooling
In the event that constantly cleans the fans and the machine continues to have temperature problems , you will have to increase the cooling of the equipment. This requires that you add one or two new fans to your system. One of these must inject cold air into the tower and the other draw the hot air that collects inside.
Implementing this method will help you improve the fan efficiency in the CPU , managing to manage a greater amount of fresh air and preventing the tower from suffering some kind of damage or deterioration.
Change the cooling
In case the problem continues, you will have to completely replace the fans . You must buy a model that is compatible with your CPU and GPU so you can make sure that it works properly. Note that sometimes these devices bring including fan models that do not provide the necessary cooling.
You can also implement elements that provide you with air, liquid or mixed cooling . These are easy to find and install , with which you can get very good results.