How to update Google Chromecast to the latest version available? step by step guide

Google Chromecast is a small HDMI device that allows us to send the signal from an Android device to a television. It has a wireless connection that, by connecting to the same network as a smartphone or tablet with the same operating system, allows the contents to be displayed on the screen to which it is hooked to be sent through an application .

This little device is mostly used on occasions that you have a video on your terminal and you want to enjoy it on a larger screen or, in the same way, a series of photographs or music that can be had on a tablet. Its mission lies in turn televisions into great media centers starting from the use of another android device which is responsible for sending the signal at all times.

Its functions are gradually improving, but for this it is necessary to have the most recent updates. If you have problems and are looking for how to update google chromecast to the latest version available, we give you the answers you need in this step-by-step guide. We explain what you have to do and we also explain how to access the new updates before anyone else.

Steps to install and update Chromecast to the new version

As usual, updates automatically reach these devices so that the user does not have to do anything. However, if Google releases a new version or patch and your device does not receive it, then you should follow these Steps to install and update Chromecast to the new version.

Next, we leave you all the instructions that you must carry out to achieve it:

1 – Save the IP address of your Chromecast

Turn on your device with Chromecast and, once it has booted up and is initialized, open the application “Google Home” to be able to access the configuration data of the device.

Now go to the section “Devices” and click on it to continue. You will then see a new screen open. Here, you have to click on the button with 3 vertical dots and, in the drop-down that appears, click on “Setting”.

Now, go down through the sections until you reach the “Information”. Observe all the data that appears and stay with the numbers that are next to “IP adress”. They are 4 groups of digits that, normally, begin with “192”. Copy them all, you will need them.

2 – Turn on your PC and login as administrator

After fulfilling the previous point, you have to turn on the pc, since you need it to continue. When you load the operating system, make sure choose an account that has administrator permissions or that it be directly the administrator. You can see how to login as administrator in windows from here.

Given that we are going to have to modify system parameters and make certain adjustments, it is important to use a user of this type, since otherwise nothing can be done or windows will not stop appearing asking for passwords.

3 – Open PowerShell and enter the necessary commands

When you are already inside the system, you have to click on the menu button “Start” and, in the search bar that appears, enter the following: “PowerShell”. A string of results will appear in which you must click on the one that corresponds to the program we are looking for, it will coincide exactly with what you have written.

Now, inside this command window, what you need to do is enter this whole string of code What are we going to tell you? You must write the IP that we saved in point 1 in the field that we indicate:

Invoke-WebRequest -Method Post -ContentType “application/json” -Body ‘{“params”: “ota foreground”}’ -Uri “http://IP HERE:8008/setup/reboot” -Verbose -UserAgent “curl”

Done this, press the key “Enter” and a process of download and update the firmware on the Chromecast. If it doesn’t, reboot from the program Google Home and try again.

In case you use Mac or Linux instead of Windows, you need to repeat all of point 1. However, in point 2 do the following:

Mac/Linux – Open the command console and run the code

If you’re using a Mac:

Once it is started you should go to “Finder” and click on it. Then click on “Applications“, in “Utilities” and finally double-click “Terminal”.

If you are using Linux:

When you are already inside the desktop, you just have to press the key combination “Ctrl” + “Alt” + “T” or, if this doesn’t work, “Windows” + “T”. Another possibility is to look in the toolbar and open the console.

Now, inside this new window to write, enter the command What are we going to tell you? Remember to put the IP where we indicate it:

curl -X POST -H “Content-Type: application/json” -d ‘{“params”: “ota foreground”}’ http://IP HERE:8008/setup/reboot -v

How to download and force new Google Chromecast firmware updates?

Like we have already said, to download the new Google Chromecast firmware updates nothing needs to be done. As long as the device is correctly connected to the network and there are no problems, the patches and updates will be downloaded and installed automatically, without having to interact, unless the user is asked for a confirmation.

If it fails, you can follow any of the procedures explained in the previous section. Although, if you prefer, you have the option of sign up for the advancement program to receive much newer versions, which are not available to normal users.

If you want to enable this possibility, follow the steps that we are going to indicate now:

• With your Google Chromecast connected and activated, and the application “Google Home” open, click inside the section “Devices” to move on.
• Now, you have to click on the 3 circles arranged in a column at the top right. A small dropdown panel will open.
• Within this menu, you have to press the option “Setting” to access all device settings.
• Once you are inside the section of “Device Settings”Scroll down until you see a section called “Advance Program”. You have to click on it to advance.
• Now, press the button “Join the program” and activate or deactivate the option of “Allow email notifications” so that the team notifies you every time there is a new update.
• After doing this, you will probably have to write the data of your Google account. Put the associated email or phone number and the password in the fields that appear, in case you are asked for the data.
• Now, just click on “It is understood” within the warning message and you will already be part of the “Advance Program”.

From this moment, newer updates will be installed automaticallyeven those that are experimental in nature. This can sometimes cause installations to arrive very close together or sometimes not everything to work as it should; although in most cases what will happen is that your updates will be installed days or even weeks before the rest of the users.