How to install Windows 10 for free using generic keys? step by step guide

You may not know it, but more than 40% of Windows users do not have an official license, and if you are here it is because you want to belong to this select group of freeware lovers.

Many people are afraid of installing an operating system with a pirated license, but the risks are not as great as you think. since currently there are very safe methods that anyone can apply to perform a clean installation that does not cause problems.

In this article we are going to teach you step by step how to install Windows 10 from scratch completely free using generic keys that we are also going to share with you here. At the end of the reading you should be an expert on the subject without a doubt..

What are the risks of installing a free licensed operating system?

First of all we must hunt myths, although we must recognize that there are some risks. Getting a paid product or service for free is piracy. So it does not stop being exempt from all the dangers of that world. But on the internet there is no problem that has no solution:

Viruses in the OS

The main fear of the people is evident; the virus. If it is already a problem to install an infected application, imagine what it will be like to do the same with an operating system, the consequences can be really disastrous we are not going to deny you.

Nevertheless, in the method that we will teach you there is no such risk because you will not have to download anything from an unknown source. Here you will obtain the version of the operating system directly from the Microsoft database, what you are going to obtain illegally is the serial for its activation, which is nothing more than a 5-byte code that you only have to copy and paste.

Driver compatibility issues

Another recurring question is that of downloading an OS that has compatibility problems with certain essential drivers. This is a real thing as there are many user complaints that this has happened to downloading the ISO image from a “gimmicked” database.

But again this should not be a problem for us, because as we told you above, you will not download anything from an unknown source, but directly from the huge oven of Microsoft.

Legal issues

Well, it’s no secret to anyone that piracy is illegal, but in Spain this applies to distributors and not so strictly to the consumer, or at least for now. In the worst case in this sense, what can happen is that Microsoft realizes that you use a “trick” license and deactivates your OSwhich you can solve with a hard reset to perform a reinstallation.

Steps to install and activate Windows 10 for free using generic license keys

Well, now that we have scared the ghosts out of your head, we proceed to teach you how to perform a clean and error-free installation and activation of Windows 10, so that you can enjoy the benefits of this operating system for as long as you want.

Create installation media

Well, the first thing we need to do is create an installation media. This is just getting a picture ISO of W10 to later record it in a CD/DVD or in a Bootable USB. In turn, they can be done in two ways, but for both you will need to download the tool Media Creation Tool , what can you download from the company’s official website at this link:

Download Media Creation Tool

Once the tool is downloaded, which will take a while depending on your internet connection, you must start it and it will show you a window with the question “What do you want to do?”, to which you must respond by selecting the option: “Create installation media (USB Flash Drive, DVD, or ISO file) for another PC”.

The next thing will be choose the ISO specifications that you are going to download, choosing the version and edition of the OS, as well as the language and other details. Now you need to choose the media type. If it is a Pendrive choose “USB Flash Drive”, and if it is a CD/DVD choose “ISO image”, and then select “Following”.

Now you must wait for the image ISO of Windows 10 is completely downloaded, which will take an hour or more since the file is 8GB. Once you download it, you just have to save it in the USB or record it on a CD/DVD.

This same process can also be carried out using an external tool called Rufus, an executable file that is very easy to use to carry out this process faster. What you should do is download the tool from this link:

Download Rufus

once you have it downloaded, the steps to follow are the following:

• After downloading you will have an executable .exe that you must open by right clicking on it and selecting the option “Execute as an administrator”.
• Now you must insert the USB formatted in Fat32 format. Once this is done, we will select “Device” in the program interface and choose the corresponding USB.

• Then you must click “Disk or ISO image (Please choose)” and use the Windows browser to find the ISO image of the one you downloaded with the Creation Media Tool. In case you don’t have it yet, you should click on “Discharge” and indicate the Windows edition, architecture, language and other details of the OS.

• To finish, we wait for the download to complete and fill in the fields “Partition Scheme” What “MBR”, “Target System” What “UEFI-BIOS” and the “File System” as in Fat32 and we click on “Start”.

After this you will have a Bootable USB Flash Drive to perform a W10 installation as if you were a professional. Now what we must do is start the installation to later activate the OS.

These will be the easiest steps to perform without any doubt:

Install Windows from scratch

Well, since we have our flash drive to install and activate our new Windows, what we have to do is proceed with the installation of it. This is something that you can do in a very short time, it will not take you more than a couple of minutes.

The steps to follow are explained below:

• What you should do is insert the USB or the CD/DVD with the ISO of the W10 in the corresponding port and proceed to restart your computer. Once you do this you must enter the bios of the samewhich is a boot mode for installing operating systems on all computers.
• To access it, you simply have to press the corresponding key after the equipment manufacturer’s logo appears (usually it’s f8, f11, f12, delete).
• Once you enter the BIOS you should browse to the bootable drive you just created for the OS installation to start. Microsoft will guide you with an installation wizard in which you will only have to fill in some personal information and little else. After that you will come to a window where you will be asked “Activate Windows”.

Basically at this point the operating system is already installed, you simply need to install it, which we will teach you how to do in the next section.

Activate W10 with generic keys

Well, to continue the above, you simply have to write the 25-digit password that the operating system asks you for in the window “Activate Windows 10.” For that you can use one of the ones that we share below according to the edition of your W10:

• Windows 10 Home: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99.
• Windows 10 Home Single Language: 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH.
• Windows 10 Pro: VK7JG-NPHTM-C97JM-9MPGT-3V66T.
• Windows 10 Enterprise: 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH.

Another way to activate Windows is after installation. Microsoft offers you a free trial for a time so you can try the OS without limitations.

What you need to do to activate the product at this point is the following:

• Log in with an account with administrator benefits and go directly to the menu of “Setting”. To do this, you must click on the button “Start” down and to the left, and then on the gear-shaped icon. Inside this window go to “Update and Security”.
• At this point you should simply click on “Activation” and then you will have to enter one of the codes that we share with you above.

Well, one thing to keep in mind is that these keys are only temporary, so they are generic. To have the full version of the program forever, what you must first of all do the steps explained above but applying one of the following licenses depending on the edition you downloaded:

• Home: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99
• Home N: 3KHY7-WNT83-DGQKR-F7HPR-844BM
• Home Single Language: 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH
• Home Country Specific: PVMJN-6DFY6-9CCP6-7BKTT-D3WVR
• Professional: W269N-WFGWX-YVC9B-4J6C9-T83GX
• Professional N: MH37W-N47XK-V7XM9-C7227-GCQG9
• Education: NW6C2-QMPVW-D7KKK-3GKT6-VCFB2
• Education N: 2WH4N-8QGBV-H22JP-CT43Q-MDWWJ
• enterprise: NPPR9-FWDCX-D2C8J-H872K-2YT43
• Enterprise N: DPH2V-TTNVB-4X9Q3-TJR4H-KHJW4

Then proceed to execute the steps that we are going to teach you right now to perform without any problem:

• With Windows 10 installed you must click on “Start” and select the option “Windows PowerShell”, which is the equivalent to “Symbol of the system” lifelong.
• With the terminal open you must execute the command “slmgr /ipk yourlicensekey”, then the command “slmgr /skms kms8.msguides.com” and to end the command “slmgr /ato”.

With that you can enjoy Windows 10 fully activated at 100% for as long as you want. It is simply up to you to make the most of it.

Verify activation of W10

Finally, we are going to show you how to check that your OS is fully activated and that you can use it without any limitations. This is very easy to do, you just have to Follow the steps that we are going to recommend below:

• Log in with an administrator account and go directly to the menu of “Setting”. To do this, you must click on the button “Start”, and then on the gear icon. Inside this window go to “Update and Security”.
• At this point you should simply click on “Activation”.

In this window you can not only enter your activation keys, but you can also see the status of the OS, if you are still being asked to enter a license key, then it means that your Windows is not active and that you have performed some of the steps badly.

Where to find keys to activate Windows 10 forever?

The issue of activation keys is tricky because it’s likely that not all the ones you find are active at the time. This is because the keys are unique and once someone uses them, no one else can because they are registered. with the first Microsoft account to do so.

There is no database that is specifically dedicated to generating pirate activation keys for Windows 10. There are simply portals that, like us, share some keys that can be generic and work for a long time, or that can already be used, so for now we can’t tell you a precise way to find Microsoft license keys.

Other methods to get Windows 10 completely free

Well, we have tried to teach you the cleanest method of performing an installation and activation of this operating system in the easiest way possible. However, if it has not worked well for you, then you can opt for other methods. Of course, it will be difficult to guarantee security in all of them.

with an activator

The most widely used solution today is to use an activator, which is an executable that can corrupt the Windows 10 code to allow you to activate it with a license of dubious origin. This is a process that is done after installing W10, but it has many detractors.

To get started, Countless users have been known to claim to have been victims of personal data breaches for using these programs, which has given them a very bad reputation.

Download a “pirated” version

The other alternative you have to get a full version of Windows 10 in any of its editions is to simply proceed to download a pirated ISO image that already comes with all the arrangements made so you don’t have to activate anything.

Once again, this method is problematic since it lends itself to information theft and a long etcetera of bad intentions.