Since mobile phones emerged, users have been in the annoying situation of having to wait hours and hours for the device to fully charge after connecting it to their charger. However, in order to avoid this, smartphone manufacturers and processors have taken action on the matter.
Thus, it is a new technology known as “ fast charger ” or “ fast charging “, which has a very clear objective: To charge the battery of a terminal very quickly . But, when this is implemented, many myths have emerged as to how advisable it is or not.
Well, with this post we want to let you know what is the fast charging of a mobile , the types that exist and how can you know if your smartphone supports fast battery charging . Adding some of the best chargers for it .
Index:
What is and what is the quick charge on smartphone?
Although the name given to this type of charge is supremely descriptive, it is worth going beyond that to understand what it is and what it really works for. Thus, we could say that the “ fast charger ” is based on a technology that aims to charge a battery at a faster speed than usual .
Which, in general terms, means that the generic name of fast charge is given to a procedure by which the increase in the current flow that is sent to the battery of a certain mobile is achieved . Which leads to decrease the time it takes to reach the maximum battery level.
In addition to this, it is appropriate to highlight that fast charging consists of increasing the voltage, amperage or both to fill the battery quickly. As, for example, when you want to fill a pot of water it will be better to use a hose to refill it in a short time, than to do it with small containers of water. As is, the quick recharge system works.
Now, to understand a little the procedure performed during the battery charging of a smartphone, we detail that these are made with a lithium-ion material and are made up of an anode, a cathode and a conductive electrolyte Thus, when the charger is connected to the device, what is done is to apply a charge to the electrodes and with it, the lithium ions lose electrons when they are attracted by the anode.
Subsequently, with the charge obtained, the energy is totally consumed by the cell phone battery. Then, with the fast charge, what is achieved is an increase in the flow of the current that is sent to the battery, so that it is filled at a higher speed, which means a shorter waiting time .
Types of “fast charger” technologies for phones and tablets and how they work
You may think that there is only one quick charging system for any smartphone, but it is not. Since, once this beneficial technology was implemented, several types of fast charger were also established for both Android and iOS mobile phones, as well as tablets.
Therefore, the differences of each of these types of technologies are based on their operation. Taking into account that have been established by different developers worldwide and thus, they are suitable for certain devices depending on their most relevant characteristics.
Here are the main types of fast loading there are:
Qualcomm Quick Charge
In the first position, we place this type that is one of the most widespread in the market, when fast charging for smartphones is involved. Which, since its first version, has created and published several revisions ranging from 2.0 and 3.0 to the most recent, that is, 4.0; all are used on devices with Qualcomm Snapdragon processors, mainly.
Among its main advantages, we highlight that includes a security and protection system , it also has a function of backward compatibility which means that it is possible to recharge a mobile with Quick Charge 2.0 using a revision 3.0 loader, for example.
Additionally, offers 5 for 5 (five minutes of charging for five hours of autonomy) and uses an INOV algorithm , so it manages to determine the exact power required at every moment to optimize the voltage to the maximum.
OnePlus Fast Charge
Formerly identified as Dash Charge, this fast-charging technology is used as of OnePlus 3 and is based on OPPO VOOC. Being one of the most famous, since it has the ability to provide more current than other fast-charging systems, causing less smartphone overheating . In other words, you can manage any activity at high resolution while the device is charging without compromising its performance.
For its part, it is worth noting that the company in question decided to introduce a new system known as Warp Charge that works alongside the OnePlus 6T McLaren Edition and as the power increases significantly, it is possible get energy for 24 hours with just 20 minutes of recharging . However, if you want to use this technology, you need to use your charger and official cable .
VOOC
Named before, it is a kind of high quality technology, since it works as a system that is responsible for transforming the high voltage to a lower one and it is done directly on the power adapter. stream. Thus providing fast charging by increasing the amperage only. It has a higher power than the one used by OnePlus Fast Charge, since acts at 5V / 5A in 25W .
Among other features, the fame of this “ fast charger ” technology is for its great efficiency on Android devices . Thus, the best alternative that users of this operating system have today, since it does not transmit heat to the phone or overheat it, thanks to its power adapter.
USB PD (Power Delivery)
It is also a type of fast charging very recognized and used worldwide, so the famous Google brand has opted for this technology and recommends it closed eyes as a single type of charge (Google Pixel phones have arrived with this load included in its last two generations ). In reference to its main characteristics, we emphasize that it has the great capacity to modulate the amperage and the voltage of the recharge process automatically.
That way, USB PD supports up to a maximum of 100W . In addition to this, it presents intelligent and flexible energy management at the system level from the optional hub communication with the PC. It even allows you to optimize power management in multiple peripherals and ensures that each mobile or tablet takes only the load that truly requires .
MediaTek Pump Express
With a slogan that indicates “ load less, live longer “, this fast-charging technology operates on a principle similar to Qualcomm Quick Charge and stands out for providing around 75% recharge per just a time that fluctuates between 20 and 35 minutes . Which was created by the renowned chip maker, MediaTek.
In addition to this, the technology in question guarantees a 5-minute charge that will allow you to have up to 4 hours of autonomy on your mobile . Additionally, it should be noted that it has 3 versions, of which, Express Pump 3.0 is the newest and ensures less overheating than the others. Being compatible with USB type C.
Meizu Super mCharge
It has been designed by the Meizu company of China and is truly exclusive on the phones of this brand. Which, is based on a very clear principle: Charge a battery of 3,000 mAh in just 20 minutes or so . Being the biggest advantage that does not generate much heat during this process, so the mobile will not suffer overheating.
For its part, this type of “ fast charger ” comes with a charger that has the ability to deliver a current of 11V and 5A , with a power of 55 watts in total. Apart from that, it is advisable to use its original cable and charger, as this will prevent the device from exceeding 39 degrees of temperature and can reach the highest possible charging speed.
Huawei SuperCharge
It is no secret to anyone that the Huawei technology company has advanced completely and therefore, could not run out of its same fast charging system so used today. Being a technology that operates at 4.5-5V / 4.5A / 5A at 25W, thus providing good assistance . However, it is no better than other types like the OnePlus.
In this sense, the SuperCharge can be found in several smartphones of the brand in question, such as the Mate 20 and Mate 20 Pro, for example. Among its best benefits, we find that it has excellent security systems added , features compatibility with the USB Power Delievery standard and can also preserve the life of the mobile battery .
Motorola Turbo Power
Another of the most recognized types, is the fast charging system itself that has the renowned brand of phones, Motorola. Which, we could say that is the most basic of all the list that we have presented. In view of this, we will only note that is based on Qualcomm technology and only has some distinguishing features. In addition, it is presented in Motorola’s high-end models.
How to know if my mobile phone supports fast battery recharge?
Because of the great advantages of fast mobile charging, you will surely be wondering if yours is capable of supporting such a fast battery recharge system or not. For this, it is possible to resort to several completely simple procedures that will allow you to specify whether you can use these “ fast charger ” technologies or, unfortunately, not.
Next, what you can do to take away this doubt:
Check the device specifications
Although it seems highly logical, it is possible that many users have not come up with the idea of reading the technical specifications of their mobile phone to know if they can charge it quickly or not. Since, if not, this could have serious consequences for the team .
Therefore, we recommend you to review this information in detail and if, fortunately, it contains it, you will not have to resort to the other procedures. But, many times the mobile brands do not include such data , although it seems incomprehensible.
Check out the original smartphone charger
If the information in question is not added in the specifications, the most effective way to know if the mobile endures fast charging technology, is checking its charger . Thanks to the fact that, in general, you can find the logo of any type of technology mentioned in the previous section.
However, it may be unsatisfactory if the data is not included . Therefore, we continue with the other alternatives.
Check the official lists of the devices compatible with a particular fast charging technology
Fortunately, on the Internet you can locate the different official lists about mobile phones that are compatible with the most recognized “ fast charger ” systems. Which is kept up to date because they even include the latest releases made.
However, if this search is complicated or in no way you find your mobile in the list, you can choose to use the last resource that we indicate below.
Use your mobile settings (on Android)
If you are an Android OS user and so far you have not been able to check if your phone accepts fast recharge technology or not, we advise you to use the device settings menu and find this information quickly .
To do so, enter the menu in question and enter the option “ About “, then click on “ Battery “. In this selection, you will be able to observe the official specification about the power of your mobile . Which usually work with a 1.5 A and 5 V figure. If your phone has numbers higher than them, it means that does support fast charging .
Which charger is the fastest for my Android mobile or iPhone ?
Surely you will also want to know some fast charger alternatives that can work perfectly for your Android cell phone or an iPhone. For which, we have specified 5 of the best chargers to make the “ fast charger ” at the highest possible speed and quality :
Anker PowerPort Spped PD 30
It has a USB C port with 30 W output and is a portable charger that displays drop-down plugs and thanks to its excellent performance in high-end smartphones, such as: Google Pixel 3, iPhone X, Huawei P20 Pro and Moto G7; It is estimated as one of the best options for fast loading .
For its part, this charger is capable of providing up to 30 watts , which can guarantee maximum speed to recharge a phone’s battery in a very short time. One of the biggest advantages is its economy , since it has a simple cost of € 23.53 approximately.
Fuse Chicken Universal
Although it is a less economical fast charger (worth € 76.99 ), it is worth paying that price for it, thanks to its high quality. Thus, we detail that it has a USB C and USB A port, has an output of 18 W and, if that were not enough, includes an internal battery that offers a nominal capacity of 6,700 mAh. Therefore, it is considered a great way for any mobile.
Among other details, this charger is extremely intelligent and therefore, can increase up to 10 W wireless charging , thus emitting faster. Apart from that, it comes with replaceable plug heads for the countries of Europe, Australia and the United States.