Wanting to hear something and not being able to do it because our Windows informs us that there is no audio output device installed, it can give us a serious headache. For this reason in internetpasoapaso.com we give you the solution for this error .
In this post you will find a tutorial to solve once and for all those failures that do not allow us to listen to audios, although most of these problems are caused by the drivers. Read below and determine the true cause .
And if even following all the steps we leave you can’t find a solution, go immediately to the last section of this post where we will show you some of the most common mistakes and leave you some guidelines to solve them.
Index:
What does Windows mean with «No audio output device installed »? How does this error affect?
We may always see this problem when we update our operating system or when deep cleaning is performed on the computer . In these cases Windows shows us this warning what is telling us that the computer, or rather the software does not recognize any hardware for audio reproduction, and this can happen for many reasons.
For example:
- When updating : when we update our operating system, it may be that for some reason or another reason Windows has not allowed the driver update for the recognition of the audio hardware, a situation that puts anyone in trouble.
- Equipment cleaning : when this situation arises, it means that when the equipment was cleaned, the hardware driver was deconfigured audio , preventing the recognition of the device.
- Bad connection : if we have desktop computers, it usually happens that we have a bad connection by cables and by such no reason any audio device can be recognized until they are ordered .
- Lack of update : drivers are drivers that need to be updated so if we neglect this many of the hardware that are in our team will start to malfunction, or even not work.
Steps to fix error message device «No error message installed« »On Windows 7, 8 and 10
Since we saw why Windows informs us of that error and the possible causes of it, we also need to know how to fix them, so here we will show you the Steps to fulfill. Showing a method for Windows 7, one for Windows 8 and one for Windows 10 , so you can easily solve your problem.
Although before starting with the methods divided by versions, you better try these steps first, since you can use it in any of your versions of Windows:
In Windows 10
- Device Manager . To start, we must access the “Device Manager”. To do this we go to the Windows menu, in the menu search we type “Device Manager” and then select it to open.
- Select driver . With the window open, we look for the line «Sound controllers and video gaming devices» and from the menu «Action », We look for the option that says « Add legacy hardware » and select it.
When we click on the option mentioned above, a box like the one we can see below will be displayed:
- The wizard box will perform a proper protocol for the driver update, so when we click on «Next» in the previous step the following window is displayed:
- There we give in the first option that says «Search and install the hardware automatically», whose option is the most recommended by Windows (you must have an internet connection). And we will see the following window when we press subsequentlyNextly:
- In the next window, we will search and select the category «Sound and video controllers and gaming devices» . Then click on «Next» and select the manufacturer and model of audio devices that we are currently using. Press again on «Next» and we will see a summary of the driver to install
- Having seen the above, click on «Next» to start the driver installation process. This does not take more than about 10 minutes, when it ends we right click on the controller and select the option “Enable device” .
- Now concluding with this we will be able to visualize in our lower bar how the error has already been solved, although sometimes Windows asks us to restart the computer to be able to start with the necessary configuration to assimilate the hardware and the new driver installed .
If even if you have done the previous steps, our team has the fault and we have Windows 10, it is good that you read this. Because our team may not recognize the audio device or recognize it defectively .
First we must verify that the hardware installation is correct and then click on troubleshooting (connected to the internet) to be the same team finding the solution to the problem.
For this, it is also recommended that the analysis of the different settings and configuration of our equipment be performed in order to verify where the fault comes from.
In Windows 8
As we have already mentioned these are driver errors or also known as drivers, in Windows 8 the solution is very similar we just have to do the following :
- Download driver. The driver can be downloaded by entering the manufacturer’s page, since the driver we are using is no longer compatible with Windows version 8 .
- Run the troubleshooter. We download the system audio problem solver and run the application. We follow all the steps and select the driver that we just installed, although you can also install the driver without this just by clicking on the file we downloaded several times (double click).
- Every driver is software that brings a solution to any faulty driver or any problem that is being presented to our computer because of the drivers.
- Software execution : When we have the downloaded program, we start it and select all the options that have to mark bullet. Although in this case as only a solution for audio we can select only where it says “MEDIA”, then in the “Start (S)” tab we click on where «Install… (Recommend)» to install the necessary drivers.
- The computer will automatically shut down and turn on again with the problem fixed.
ul >
In Windows 7
For Windows 7 there are many solutions, although we prefer that you follow these steps, since it will surely eliminate the inconvenience we have been presenting .
Download All Driver for Windows
What happens if I still can’t install the audio hardware? Possible causes and solutions
If even though we have tried all the steps and method described above and still cannot solve the problem, the causes and the real problem may be as follows. If one of these are your mistakes or the source of your problem it is recommended that you follow the guidelines that we leave for the solution to be effective .
Audio driver error
If doing everything we discussed above can not solve anything, it is because even the existing driver for that audio device is simply not compatible with the version of Windows you are using, or just not It is compatible with any version of Windows.
So the solution is simple, get another device to listen to the audios, but realizing that it is compatible with the version of Windows you are using .
Device port error
If you have a connection port error, you just have to look for another port to listen to the audios , because if it is not done, no problem will be solved. This situation is Very common in PC Desktop, so if you do not have how to change it to another port, you will need to change the port, because it may be damaged, or it may already be.
Internal device error
If you are very sure that it is an internal error of the device there is only one option and it is to buy a new one or send to accommodate the one you already have, since if this is not solved you will not be able to listen to any audio even in your computer or any other .
So we recommend that when you buy a new audio device, be aware of the care you give it, without constantly tripping over it or hitting it hard since these are some of the causes for these devices to be damaged.
>
Already checking everything we’ve left, we hope you liked it. Here you will always find a complete solution to all your problems.