One of the most important things today is to have a fast Internet connection , and especially when most devices are used through this network, as they are Smartphone, Tablet, consoles, Smart TV, laptop and desktop computers. This is why it is important to have a good wireless network connection which will allow you to enjoy the best services of your devices.
However, it is very likely that in your home or office there are places where the wireless network signal does not arrive or is simply too slow, thus preventing you from using it in a correct way. This is one of the most common problems and that has surely happened to most users. Due to this, different devices have been created that are capable of solving these problems providing coverage to those places where it did not arrive before.
These devices are known today as repeaters and have as their main function to take the signal from the wireless network they receive from modems to re-emit it with much more intensity and power allowing to expand the coverage of WiFi inside the house or office . Because of this, here we are going to show you how to configure these amplifiers so that you can improve your WiFi coverage .
Index:
Manual to configure the Wi-Fi TL amplifiers -WA854RE and TL-WA850RE correctly
These amplifiers have the main function of being able to send Wi-Fi coverage where the main access point does not reach , in order to improve the signal in all areas of the home. A repeater will simply be in charge of receiving the wireless signal from the central unit , in this case it would be the fiber optic router or ADSL and once this coverage is received, the socket and the sends with much more power so that it can cover all areas of the house including those where the signal did not arrive before.
These devices are very easy to use and also very practical, all they need is to be connected to an outlet to start working. In addition, they should be placed in strategic sites , that are not very removed from the router and that send the signal to areas where it is usually very bad or does not arrive.
It is important to keep in mind that before you start using the amplifiers it will be necessary to configure it with your wireless network so that they can function properly. So, here we will explain how to configure the Wi-Fi TL-WA854RE and TL-WA850RE in a correct way, to do this just follow these steps:
Configure the amplifiers TL-WA854RE and TL-WA850RE
As we explained previously the TL-WA854RE and TL-WA850RE are specifically a wireless network coverage extender. One of the advantages of this device is that it works with all operators of Internet. Therefore, you will have no problem acquiring it to improve the intensity of your network.
Currently the TP-Link Extender extenders are the best sellers in the market and this is due to its smooth operation. In addition, they are characterized because their configuration is usually simple and fast. It is important to mention that both teams are configured in a similar way and there are different methods to do it, for this just follow the steps that we will explain below:
Through the “WPS” and “Range Extender ”
- To begin this process you will need to verify that your Internet company’s router is equipped with the “WPS” system. This will require you to check if the device has the “WPS” button
- When this button has already been located on your device you have to connect the TP amplifier -Link to a power connector closest to the router already installed on your computer.
- Now you will have to wait for the l extender to finish turning on completely.
- After a few seconds of switching on, press the “WPS” button ”Of the WiFi router for at least three seconds . Then you must release it and quickly press on the other “Range Extender” button on the WiFi device either TL-WA854RE or TL-WA850RE and it is pressed for another three seconds.
- When this whole process of pairing with your router has been completed, then you can disconnect from the power outlet where it is connected. Now you can move it to the place where you want to place it definitively.
- Generally, it is recommended to install it somewhere in the middle of the house, that is between the location of the router and the areas of the housing that have more problems for the Internet signal.
- To confirm that the WiFi extender is well configured, the computer lights that appear in a circle must be On, This will indicate that it was installed correctly.
- If your installation has been completed completely, the equipment should start to function properly. To do this, you can place yourself in the places of your home where the WiFi signal had major problems, and with the help of your Smartphone, Tablet, laptop, among other equipment you can Verify this connection. This way you will notice if it works quite quickly or the signal remains the same.
In the case that your device does not have the “WPS” button you will have to perform this configuration through another method, in this case it is the configuration through the browser , for this you will need to perform these steps:
- To start you will need to connect the TL-WA854RE or TL-WA850RE to a power outlet near the main access point. Once connected, wait a few seconds while the device starts to flash.
- The next thing will be to connect the device to the computer, this can be done through two options, either by Ethernet cable or wirelessly.
- If you chose to connect via the Ethernet cable you will need to disconnect the computer from any wireless network to which it can be connected.
- Now connect the WiFi extender to the computer via the Ethernet cable.
- If you choose connect it wirelessly, you must disconnect the cable connection. Click “Quot: Wireless network connection & quot” on your desktop.
- Click on the «Update» icon and connect the extender. The factory name of the equipment is: TP-LINK_Extender_XXXXXX.
- Once you have done any of these two ways you just have to follow the following steps:
- In the navigation bar of your favorite browser you will type Tplinkrepeater.net and press furtherEnterleigh.
- There will open a page with several methods , you must choose the one that suits your needs. Once you have inclined to one of the two options you will be asked for a password and a user , in both boxes you must place “admin” without the quotes.
- When you have entered you will see a “Quick setup” page.
- Select the router / AP WiFi network.
- Now type the WiFi password of your main router / AP. This can be copied from the main router or modified by a new one.
- Once the configuration is finished You need to check the LED lights, they indicate the signal strength. If the settings were correct, the lights will turn on.
- When the extender is configured correctly, it only remains to be located at a fixed point where you can distribute signal to all places in the house, in order to get the best signal and coverage. When you reconnect to the power outlet, you only have to wait for about 30 seconds for it to start working.
Configure the TP-Link repeater through the browser
You can use this method if the WPS has not worked . To perform this step you must follow these instructions:
- Connect the repeater to the power outlet just next to the router.
- Turn on the computer and start search for available WiFi networks .
- Now you must establish a connection to the computer network, it must have a name similar to “TP-Link_Extender_2.4GHz».