Nowadays most models of printers already have the Wi-FI technology , this with the aim of making things much easier for users. However, many of the people who acquire this type of equipment never use it correctly, many of them do not take advantage of all its features and continue to use them through the cables.
More and more models of printers with Wi-Fi connection that go to the markets , these are created to be able to print documents, photographs, among other things without the need to have to do Uses of connection cables. In addition, it will allow you to print without the need to have your computer or laptop next to the printer.
That is why today we are going to show you how you can connect your printer with wireless connection either in your work or home, this will allow you to make prints in a very easy and fast way through of the wireless network configured with your device. As well as being able to take advantage of all the printing functions.
Index:
Steps to install and connect your WiFi printer correctly
Being able to perform this installation and configure your printer to the Wi-Fi network is extremely easy, this will allow you to print from your computer, laptop or device mobile.
This technology has already been included in virtually all computers today, which is very likely to have one of these printers in your home, keep in mind that the installation and connection process can vary according to the brand of the same , that is why here we bring you what are the steps to perform this process according to the different brands most recognized in the market.
HP
Most HP printers now have a wireless network connection. From 2014 onwards the brand began to include this option in each of its computers in order to facilitate them to its users the handling and use of them.
If you are one of the users who have an HP in your home or work with connection to a wireless network here we show you what are the steps so that you can install it and connect it to the Wi-FI .
- To start with this process the first thing you have to do is locate your printer near the router.
- Then you will connect to the power .
- Then you will turn on the printer and install the print cartridges , for this you can be guided by the manual of the printer.
- Now you just have to wait for the machine to perform its boot routine, including the print and alignment page.
- The following will be to choose one of the methods connection.
- If your printer supports it, you can choose Ethernet, , connect the device and then start installing the printing software.
- Once installed , you must disable the Ethernet connection of the system, and then activate Wi-Fi to start using it through the local wireless network.
Epson
Most Epson devices have this function included, which will allow you to enjoy all the functions through the Wi-Fi network without any problem. To be able to carry out this connection you just have to follow the steps that we will explain below:
- To start installing it, the first thing you have to do is insert the installation CD / DVD of the equipment. If you don’t have this, you can download the software through the internet from the official Epson website.
- You must connect the Epson to the stream, but that is not connected to the computer via USB.
- The next thing will be to insert the CD and start with the software installation, to do this just you will have to follow all the instructions that appear on the screen.
- Select the preferred language and click on permittedContinuar†.
- You have to accept the software license agreement to continue with the “Software installation”.
- And then you must click on “Install”.
- Note that the installation may take a few minutes.
- After the “Settings” of the printer will appear on the screen, you will click on subsequentlyNext†.
- Now two options will appear on the screen, you will select “Wireless connection” and finally click on subsequentlyNextly.
- A new screen will appear, there you will select “I will configure the printer for the first time” and click on “Next”.
- Now the wireless connection process will start, it can be carried out automatically or manually. If your computer connects automatically you will see the following window .
- If the computer does not connect automatically this window will appear and you must do the following.
- Next you must select some of the following methods: “To configure the product use the product control panel button” or “Use printer button” and you click on nextNext †.
- Once this is done, the Wi-Fi network installation and configuration process will be completed .
Canon
If you are a Canon user, you can also carry out this in a very simple way, one of the most effective methods to install and the connection to the wireless network is through the “Button connection ” also known as permittedWPS†.
This will allow you to make this connection between the devices in an easy and fast way. To be able to make this connection through the “WPS” method you just have to follow the steps that we will explain below:
It is important to mention that before carrying out this it is necessary that two requirements can be met: “The access point must have a WPS button” and “The network that is it has to use they have to be WPA or WPA2 security protocol. ” Once we are sure that we have these two conditions, this process can begin.
- The first thing we have to do is turn on the printer.
- Now the “Wi-Fi” button will be turned on. To do this, it will keep pressed for several seconds until the button light turns on. >
- You have to be sure that the button starts to blink , once this is the case, you must go to the access point and press the WPS button >, this must be done quickly no more than one minute.
- Note that the Wi-FI button light will continue to flash while the power is searched. The Wi-Fi will start to flash when it is already connected to the wireless network access point .
- Once the printer has already completed the connection to the wireless network, the Wi-Fi button will stop blinking and will remain permanently on.
Once all this has been done, we can determine if the configuration was successful. To do this, you can print the print network settings . For this we will do the following:
- The printer must be on .
- Now enter a A4 size sheet.
- Next you go Press the “Resume” or “Cancel” button until the button light flashes at least 15 times.
- Once the button is released the printer will start printing.
- As for printing, it is necessary to be able to verify that it indicates “Active” and that the correct name of the wireless network is indicated.
- After this, you will have completed the installation and configuration of WPS. In this way, you can start taking full advantage of your printer through the Wi-Fi network.
Brother
Brother is currently considered one of the best brands of printers on the market. It is characterized by its excellent performance and quality. Most of their computers have wireless connection which allows their users to get all the possible performance from these computers. To be able to carry out the configuration and connection of these machines with a Wi-Fi wireless network you must follow these steps:
- The first thing you are going to do is s connect the machine to the electrical outlet or power point . Once it is connected you will turn it on, keep in mind that it should not be connected to the computer by the USB cable.
- Now you will turn on your computer.
- Then you will enter the CD-DVD to your CPU drive to start the installation of the Brother machine software.
- The installation screen will appear automatically on your monitor, select the preferred language and click on “Next”.
- Now the menu will appear Main CD-DVD. The “User Account Control” option will appear on the screen and you will click on “Allow” and then on furtherSírd.
- You will see a window with the license agreement, you will click on “Yes” approve this agreement.
- Then you will select “Wireless Network Connection ” and then “ Next ” or subsequentlyNext†.
- Now two options will appear, you will choose “Brother Peer to Peer Network Printer” and then “Next” .
- Now a new window will appear on the screen, you will get two options where you will choose “Change the Firewall port settings to enable network connection and continue with the installation” and finally you will click on clearlyNext†.
- A new list will appear, your Brother print peripheral should appear there . Then you will click on “Next”. You have to follow the instructions that are given to you to install the printer driver to carry out the network connection.
- Once this is done, the configuration of the Brother machine .
ul >
