Is your Windows 10 running a bit slow? No wonder. This operating system has been very criticized because after a while it begins to behave in this way, making you believe that the failure is in the performance of your equipment and not in the software. However, it is not necessary either to perform a hard reset to recover the processing speed, it is enough to optimize it in a certain way so that everything returns to normal.
This Microsoft operating system is a program that regulates and manages tasks from the moment you turn on the computer. This checks the hardware and software of the equipment, to verify its status and operability. If Windows is not optimized, the performance of your computer begins to decrease; begins to process everything slower, execute tasks inefficiently and conflicts with the applications appear. Those are the first signs that show that the operating system is about to collapse.
That is why in this tutorial we will teach you all the tricks of how to speed up Windows 10 to the maximum and optimize the performance of your computer by making a few adjustments you can boost all resources 100%, so that takes full advantage of these useful tips.
20 tricks and tips to speed up Windows 10 and improve speed and speed of your computer
It is no secret to anyone the annoyance of thousands of users about the performance of Windows 10 because its boot process is very slow. In the worst case it even takes several minutes. But this is the least of the problems because if you continue using it like this, everything will get worse and worse ; It will hang in the middle of an important task and will make it virtually impossible to work at ease on the team, so it is necessary to take action as soon as possible.
Here I will tell you how to solve the operating system problems, getting you to improve speed . Everything you wanted to know is in this step-by-step guide, so let’s not waste any more time and get into the matter.
Maximize processor performance
If you are using a desktop PC, you can optimize the performance of your CPU by changing its power options . Right-click on the Start button in the lower left corner of the desktop ( or on the Windows key + X ) and access the menu « Options energy ». On the screen that is displayed visually, click on the « High performance « button.
How can this help you? Simple. The default system configuration establishes certain limitations to prevent the equipment from consuming too much electricity, which means that the processor will not perform at maximum capacity. It’s a way of putting a muzzle on a rottweiler. So when you remove said “muzzle” the beast will roar again and you can fully enjoy its full power.
Fixing on the desktop looking for files
One of the most powerful features is the “ File Explorer”, which is nothing more than the ability to save searches. The visual shows a saved query that identifies all Word documents in a specific folder.
When you have many .doc files , for example, it is a convenient way to search for files of the same nature. But this is even more convenient if this search is found in the Start menu, because that way you can find it even faster.
If you want to take advantage of this, open the “ File Explorer” and navigate to your “Users” folder and then to the subfolder “Searches” . Right-click on the saved search and place it in the start menu for easy access.
Learn to limit the reach of Cortana
Microsoft wants you and your personal assistant, Cortana, to use Bing as their default search engine instead of Google. You can force this tool to use a different search engine, but first you must change your default web browser .
If Mozilla Firefox is your default browser in Windows 10 , then Cortana should use Google Search. If Chrome is the default browser , you must install the “Chrometana” extension and change the default values. If you do not, you will learn that Cortana is particularly stubborn and will continue to use Bing.
If you want to change Cortana’s behavior further, you can limit the search parameters. For example, it is possible to tell Cortana not to connect to the Internet . To apply all this we mentioned, you can do something very simple.
- Click on the “ Cortana ” search box on the taskbar.
- Then go to the “ Cortana Settings” screen ”, as shown in the image above.
- At the bottom you must locate a configuration that says“ Search online and include web results ”.
- When changing to “Off”, Cortana will no longer display web results, regardless of the search engine used by default.
Enjoy OneDrive Fetch
When you create a Microsoft account , one of the benefits is to gain access to OneDrive cloud storage at no cost. But a little used feature called Fetch can give you even more benefits (but this does not apply to OneDrive for business) .
- Right-click on the OneDrive icon and select represented Configuration.
- On the next screen, select the “ Configuration” to access the screen shown in the image above.
- Find the checkbox called “ Let me use OneDrive to collect all my files on this PC “.
This tool not only allows you to improve the performance of the operating system, but you can also make backup copies to save the most important information inside your hard drive in the cloud, so that you can access it when you want and even restore it to your computer after a hard reset .
Change the location where applications are installed
Many computers today are equipped with a combination of SSD and large capacity mechanical disks. It’s a good idea, but it requires a bit of administration, especially when it comes to the installation location of the new applications.
In most cases, you want the newly installed applications to be in the mechanical unit , and not in the lower boot SSD.
To change the default drive to install applications do the following:
- Click the Start button and follow the path “ All applications> Settings> System> Storage .
- You should see a screen similar to the one shown in the image above. On this screen, you can change the default locations for applications, documents, music, photos, video and virtually any file that is stored on your computer.
Create a custom shortcut folder
If you use the Windows 10 Start menu to access your applications, the following suggestion is for you. You can create a custom “ Start Menu” folder that contains shortcuts to applications, documents, etc. that you use regularly. You can then set this folder on the Start screen or on the taskbar.
Start by opening the “ File Explorer” and navigate to this folder:
C: Users XXX AppData Roaming Microsoft Windows Start Menu Programs
In the Programs folder, you can add your own subfolder. In the example, the name of the folder is “A_Custom_Start_Folder” , so it will be shown in the “ A ” section of the Start menu. You can put in this the shortcuts you want.
Remove Windows.old
Hard disk storage is less expensive and limited than in the past, but that does not mean you want to waste space. If you have updated Windows 10 from Windows 7 or Windows 8 , you probably have a folder on your hard drive that contains the previous version of your operating system. In case you never return to it, you can delete the information on it and save some space of storage on your hard drive.
- To delete the folder, open the “ File Explorer “, go to the hard disk where Windows 10 is installed (usually it is in drive C) and right click .
- Now click on the menu item «Properties» to access a screen similar to the one shown in the image above.
- After click on the “ Clean disk ” button to start scanning, then click on the “ Clean files ” system button.
Manage Windows Update for performance
Windows Update, believe it or not, absorbs resources when running in the background . Fortunately, you can configure it to run only at specific times, such as when the device is not operating, which means it will not restart while in the middle of some important task.
To configure the update to run at specific times, type “ Windows Update Settings ” in the search bar and run the configuration utility >.
In the “ Update parameters ” section, select “ Modify active hours “.
You can change the active hours in this menu . I advise that it be changed to a period of time when the computer is on, but it is not used.
Ram disk
Of all the applications that claim to improve performance, no program does it better than a RAM disk. A RAM disk program creates a drive using physical RAM , which is obscenely fast. Users move parts of the essential software to the RAM disk, resulting in high speed gains.
The configuration of a RAM disk only requires downloading and installing « Dataram RAMDisk» . After running the software, you must configure it with the following options.
- To recap, you must choose the maximum RAM disk size, which is approximately 1 GB. You can use any size, but a smaller capacity limits its usefulness.
- Also, check the box for « Set Disk Label» .
- In this way, you can identify the disk in the next step. Next, select « Start RAM disk «.
- The next step is to configure your browser to read and write cache files to and from the RAM disk.
- First, right-click on the shortcut of your web browser and select « Properties » in the context menu.
- Windows 10 makes it easier than Never enter a browser shortcut. You can do it directly from the taskbar.
In « Properties» , select the « Shortcut « tab. Then, within the destination text entry field, add the following code at the end of the text, where “ R ” is the letter of your own RAM drive:
The complete line of code should look something like this:
«C:} Program Files (x86) NGoogleChromeApplicationChrome.exe» –disk-cache-dir = R: N-
Your own code may vary, depending on the Chrome settings . Finally, select OK and restart the browser. From now on, Chrome will read and write cache files to the RAM disk.
Registry Cleaner
The registry saves a manifest of the configuration of Windows and other programs. Over time, thousands and thousands of registry modifications slow down system performance. A registry cleaner removes those changes . Download CCleaner updated . This will be your computer’s best friend.
Remove unnecessary applications
Usually, when you buy a new computer, it comes with many preinstalled applications that you don’t need, including the usual software and tools you never use and that will only waste space and resources on your computer.
- Open « Settings «.
- Click on “ Apps” .
- Then on “ Applications and features ”.
- Select the application you wish to remove and click on the“ Uninstall ”button.
Check for malware on your computer
It is known that viruses, spyware, adware and other types of malicious programs occupy much of the resources of the processor, memory and disk, which makes the device unusable.
You can use Windows Defender Antivirus to analyze and remove malware from the device. To do this you must open Start. Find the “ Windows Defender Security Center ” and click on the top result to open the experience. Then click on “ Protection against viruses and threats ”. Take a test to rule out threats
Disable visual effects
This system offers a large number of visual effects, from animations and shadows to more sophisticated effects. But that lowers team performance.