A very annoying scenario for any user is starting to use their computer and realizing that login is slower than normal. This may be occurring due to different factors, so it is necessary to carry out some configurations to try to solve it.
All computers when turned on take a few minutes to boot to 100%, because they must not only boot the system as such, but also load some programs. However, when the boot time exceeds the usual standards, there may be minor inconveniences on the equipment that are hindering its proper functioning.
Therefore, we are going to teach you in this post How to speed up Windows 8 login so it starts up faster? You will discover several very effective methods, as well as an interesting tool that will make it easier for you to detect problems with your PC.
What are the reasons why Windows 8 logs in slow?
Know for sure the reasons why your Windows 8 computer takes a long time to log in it's a bit more complicated than it sounds.
Some of the common problems that may be hampering the successful login are:
- If there is not enough space on the hard drive.
- Programs leftovers.
- Old files cached and temporary.
- Unnecessary programs that are executed during startup.
- Fragmentation hard drive.
- Corruption of data.
- Excess of programs not used.
- Protector configuration feeding.
- Different antivirus programs running on the same device.
- Large number of programs running in the background.
- Lack of updates Windows.
To help solve this, there are tools designed to conduct a study of your equipment and thus indicate specifically what may be wrong. For example, on the website of Microsoft you can download Microsoft Fix. It is a totally free tool that focuses on diagnose and significantly improve the performance of your system automatically. However, you should know that Microsoft Fix it is not available for Windows 8 and 8.1 computers.
Learn step by step how to speed up the Windows 8 session startup
To solve the problems related to the slow startup of your Windows 8 computer, there are several very effective and easy to do solutions. Some are usually very obvious, while there are others that you may not have known about.
We tell you what to do to speed up the Windows 8 session startup:
Uninstall additional antivirus programs
An error that many users tend to fall into without realizing it is use more than one antivirus or antispyware program at the same time. This causes the device to experience a reduction in performance. For this reason, the ideal is select an internet security program to run on the device and, after that, uninstall the other programs.
To do this you must proceed with the following steps:
- Swipe your finger from the right of the screen.
- Click on Search for.
- Writes "Appwiz.cpl" inside the search box.
- On the left side of the screen, tap cpl.
- Within the list of installed programs, uninstall unnecessary Internet security programs.
- Reboot your team.
Close programs in the notification area that run on startup
If your computer with Windows 8 takes a long time to start, one of the causes may be that there is a large number of applications or several of them that have a high impact on the computer during the start time. Some of these programs add an icon to the taskbar, so you can easily recognize them. We recommend you stop them, so they don't run automatically during startup of your device.
For this you must:
- Go to the Home screen and click on the image of the desk. This way you can see the Icon Tray.
- Touch each icon to see the name of the program.
- If you want to make sure you can see them for all running programs, tap Show hidden icons.
- Open one of the programs you don't want to run. Within its options, locate a configuration similar to that of run at startup. Proceed to select the option Off or No.
In case you want to take a look at the entire list of programs that run at startup to proceed to disable them, follow the instructions below:
- Press right button in the blank area from the taskbar. Then go to Task Manager.
- Select in More details in the lower left corner of the Task Manager.
- Inside the tab Start, specifically in the Task Manager, you will see a list of apps that start automatically every time you turn on your device.
- If you see programs that you don't want to run at startup, just click on it and go to To disable.
Keep in mind that to disable A program so that it does not start automatically when your computer starts up, it does not mean that you will not be able to use it. If want to work with it, just click on its icon and you're done.
Change program settings
Sometimes it is not necessary to go to disable the start of a program automatically so that it does not open when you enter Windows. May just you need to add or remove some options of the same and ready.
To change the configuration of a program you have to:
- Choose the top right corner of the screen and move the mouse pointer down or just slide your finger from the right of the screen.
- Click on Search for.
- Writes "Appwiz.cpl" inside the search box.
- Tap on Applications.
- On the left side of the screen, go to "Appwiz.cpl".
- Choose the program you want and then go to Uninstall, Change or Repair.
Clean disk errors
If your PC is a bit old, they may eventually show up hard drive errors. This causes it to slow down, so it is important perform a disk check to identify and eliminate any type of errors present.
To perform a disk check, do the following:
- Swipe your finger from the right of the screen or point to the upper right corner of the screen and move the mouse point down.
- Go to option Search for.
- Inside the search box, type Equipment.
- Tap on Applications and then click on the team on the left side of the screen.
- Click on the unit you want to repair and then tap on Properties.
- Select the tab Tools.
- Within Error checkingclick Search for. Depending on the size of your hard drive, the process may take more or less time. If you are asked to enter an administrator password, enter it.
- When the check is complete, reboot the device.
Defragment your hard drive
If you need greatly improve the performance of any device, one of the most recommended options is through the hard drive optimization. Previously this option was known as Disk Defragmenter, and can be run according to a weekly schedule or manually.
The process to proceed to defragment the hard drive manually is:
- Choose the upper right corner of the screen and move the mouse pointer down.
- We came in Control Panel.
- Select the option Applications and click on the team on the left side of the screen.
- Choose the unit that you are going to repair and, later, go to Properties.
- Enter the tab Tools. Then go to Optimize and then in Optimize and defragment the drive.
- Within State select the unit to optimize. An important fact is that in the column of Media type you must indicate what type of unit you are optimizing.
- For determine if the drive should be optimizedclick Analyze. In case you are asked for the administrator password, enter it.
- Once Windows finish the process of analyzing the unit, in the column Actual state check if it needs to be optimized. If that drive is more than 10% fragmented, it is recommended to optimize it.
- Click on Optimize.
Some important aspects to take into consideration to optimize a hard disk drive, is that the process may take a few minutes. Other than that it is not possible to update the network drives and if the drive is not shown in the section Optimize drives, there may be an error. In these scenarios, it is best to repair the drive first and then optimize it.
If you want to change the optimization schedule, follow the instructions below:
- Go to the upper right corner on the screen and move the pointer down.
- Go into Search for and when it opens, write Equipment.
- Choose Applications and click on Equipment on the left side of the screen.
- Click on the unit to repair and then click
- Go to Tools / Optimize and defragment the drive.
- Login to Change settings. You can then select any of the following actions:
- Disable scheduled optimization: clears the Run on schedule check box.
- Modify scheduled optimization frequency: Click the drop-down list next to Frequency. Followed by that, tap on Daily, Weekly, or Monthly. By default there is the weekly optimization option, and this is run during automatic maintenance.
- Select units that you want to include or exclude in scheduled optimization: go to Select next to the units and enable or disable the check boxes, then tap OK.
- Tap on To accept.
Clean the hard drive
To delete unnecessary files that are stored on disk drives, it is best to clean the hard drive of temporary files and system files, empty the Recycle Bin and eliminate all those elements that you do not need.
To clean the hard drive you have to:
- Go to the upper right corner on the screen and move the mouse pointer down. Then enter Search for and write in the box search Free up disk space.
- Go into Setting.
- Tap on Free up disk space by deleting unnecessary files.
- Inside the list Units, select the one to clean.
- Tap on To accept. Finally, select Delete files.
In case you are going to clean the system files that are associated with your account, you must follow the instructions below:
- Inside the list Units, select the drive you want to clean. Tap on To accept.
- In the dialog box Disk Cleanup, click on Clean system files.
- On the tab More options, you will get two additional options to free up space:
- Programs and characteristics: This option opens programs and features in the Control Panel, where it is possible to uninstall those programs that are no longer used. In the column of Size, you can see how much space each of them uses.
- System restore and snapshots: this feature uses restore points to restore system files to an earlier point in time. If your device is working normally, you can save space by deleting the previous restore points.
Disable visual effects
Another solution that can work very well for you is disable visual effects that run on your Windows 8. The interesting thing is that you can choose one by one which effects you want to deactivate or simply allow Windows decide which ones will work and which ones won't.
The step by step to disable visual effects in Windows 8 is:
- Stand in the upper right corner on the screen and move the mouse pointer down.
- Login to Search for and place Performance information and tools.
- Tap on Setting.
- Then click on Performance information and tools on the left side of the screen.
- Login to Visual effects settings.
- Within Visual effects, go to option Adjust for best performance and then click If you want to go for a less drastic alternative, select on Let Windows choose what is best for my computer.