While it is true, Windows 7 It is estimated as one of the most famous versions of the operating system of Microsoft. This, thanks to the remarkable trajectory it has had and considering that it is compatible with both personal computers and laptops, as well as tablets and media centers. Reason for which, continues to have numerous users today.
So, W7 is defined as an OS that takes up little space, It is capable of saving energy, supports greater synchronization between the PC and the user, as well as optimal customization to optimize each task available there. However, although it has so many advantages, you are not exempt from certain problems, errors or blockages.
One of these breakdowns is known as the "Blue Screen of Death in Windows" and it consists of one of the most serious drawbacks that can occur in a PC. Since, it is not a simple error message, but it is classified as a "suicide note", for example. To learn more about this, we invite you to read this post.
What are the main reasons why the Blue Screen of Death appears in Windows 7?
Also known as Blue Screen of Death or BSOD, the Blue Screen of Death in W7 refers to a screen that is displayed by the operating system when you can't recover from a system error basically. It even appears when a break is in danger of occurring. In this sense, whenever a fatal error occurs in Windows 7, users will get this kind of screen on their PC.
Whereas it usually happens while the operating system kernel fails to restore itself from error and the only action that can be performed on the computer is to restart it. That way, users will lose all unsaved work on PC and also, the integrity of the programs that are currently running, will be jeopardized in its entirety. Thus, the file system of these softwares and the files themselves created by means of Windows, they will be at a critical point.
Since, it is possible to lose all the information on the hard drives managed by W7. Now, specifically, there are several reasons why the dreaded blue screen may appear in version 7 of Microsoft Windows.
So, below, we mention each of them:
- Failures between incompatible versions of DLLs or ".Dll files". This being, a problem known as “the hell of DLL”And they are incompatibilities that increase over time, as software is installed.
- It also happens when there is a lack of maintenance at the software and hardware level in Windows 7.
- If found excess data from RAM, a system crash will occur and the Blue Screen of Death will automatically be obtained.
- Another of the most common reasons is when there are faulty device drivers. Like, damaged hardware or hardware incompatibilities.
- In case it exists a large excess heat in the devices, you are also likely to see the Blue Screen of Death on W7.
Learn step by step how to fix blue screen of death in Windows 7
Although the Blue Screen of Death on W7 It is generated when there is a serious error in the system, the truth is that it is not difficult to solve a problem of this type. Taking into account that, There are several resources through which it is possible to recover the functioning of the PC., In its whole.
Therefore, below, we explain each of these solutions:
Restarting the computer
If you get the error of the blue screen in WindowsThe first thing that is recommended to do is restart the computer in safe mode to try to solve the problem with it. Thus, it is possible that when the PC is turned on again, it will be completely restored and offer optimal performance.
However, in most cases, this is not enough. Reason why, you need to try other solutions. Taking into account that, if you need to keep the files on your disk, you must put them safe before everything in order to restore them when the system returns to normal.
From the Windows Startup Recover
While true, startup repair is capable of detect and modify some kinds of system breakdowns that prevent Windows from starting. Since, it is a utility that has been designed in this SW in order to automatically discover the existence of problems in the system. Consequently, one of the suitable solutions to bypass the Blue Screen of Death in W7, lies in run startup repair with pre-installed recovery options.
To do so, the steps consist of:
- First of all, remove all CDs, DVDs and other media from your computer to proceed restart it using the start / stop button on the PC.
- Then, if the computer has a single operating system installed, hold down the F8 key while the computer restarts and before the Windows logo appears.
- In case the computer contains more than one operating system, proceed to use the arrow keys to indicate which operating system you want to repair (here, it would be Windows 7) and after that, press the F8 key.
- Now inside the screen "Advanced boot options", use the arrow keys to highlight "Repair the equipment" and hit Enter.
- Next, choose a keyboard layout and click “next”. Thus, from the menu "System Recovery Options", Choose "Startup Repair" and it only remains, follow each of the instructions.
Restoring Windows 7
Another of the most appropriate solutions to put aside this dreaded screen W7, consists in restore the system to an earlier date when your PC was working perfectly. Well then, you can make sure that the team will work correctly, without presenting any fault of this kind and apart from this, it will help you to verify that if the updates of the SW are responsible for the appearance of the blue screen.
In this sense, to restore Windows 7 correctly, the steps to follow consist of:
- Initially, enter the Control Panel on your pc and go to "Recovery".
- Then, click "Open System Restore".
- Now, it is time to activate the box that indicates “Show more restoration points”.
- After that, choose a date prior to the appearance of the Blue Screen of Death error, to click "Next".
- In conclusion, click on "Finish" And with it, we proceed to restore the operating system.
Installing the OS from scratch
If, with any of the recommended methods above, you have not been able to solve the problem, you need to completely reinstall Windows 7. Since, in this way, the programs you have installed will be removed and the default settings of the operating system will be restored. Therefore, before proceeding, it is important that you make a backup copy of your files, since the hard disk will be formatted during the installation process.
In addition, to format the hard disk during the installation of W7, it will be necessary to start the computer with a USB flash drive or the OS installation disk, the steps to follow consist of:
- To get started, turn on your computer and insert Windows 7 installation disc or USB flash drive. That done, turn off the computer.
- After, you must restart the PC and press any key, when the system requests it. To do this, proceed to follow the instructions displayed on the screen.
- Now, from the "Install Windows" page, select the language and other preferences to click on "Following".
- Later, on the page of "Read the license terms", you have to click on "I accept the license terms" and click on Next.
- Followed by that, click on the “Custom” option corresponding to the page "What kind of installation do you want?".
- In the page "Where do you want to install Windows", proceed to click "Drive Options (Advanced)".
- Then you have to select the partition you want to change and you must also click on the format option you want to do. Also, follow the instructions.
- Once you're done, click “next” and complete the installation process by following the instructions correctly. At this point, you will have to assign a name to the computer and configure an initial user account.
However, it is worth noting that installing Windows 7 from scratch, does not guarantee that the Blue Screen of Death problem is completely corrected. Since, it can also be due to a defective component of the equipment and in such case, the solution will be identify which is the affected part to be able to change it.