Batteries are still today one of the main problems of mobile devices , especially for iPhones. And despite all the technological advances that they exist, the charge on mobile phones is still very short. Usually, these charges usually last 1 day or a little longer when the equipment is new but, over time this gets worse, so much so that usually only lasts a few hours.
However, in recent years mobile batteries have been presenting some improvements in devices but, their manufacturers are still worrying more because the charging time is much faster and not in how long it can last. Although these charging batteries usually last longer, they are still insufficient to meet the needs of users.
In such a way, that the same user has to be in charge of extending the useful life to it in order to try to make it last as long as possible and not download it so quickly. One of the main signs that are being damaged is when the device starts to shut down even if it has some charge. In the case of the iPhone , it is recommended that when the battery reaches 80% of its charge, slow down the charge to protect the battery and in turn extend its life.
Index:
What does it mean and what is the purpose of calibrating the battery? Advantages and disadvantages
Calibrating the battery of a mobile device is one of the best tools we can use to try to extend its life and therefore get better performance. In general, when you buy a terminal, your battery is usually calibrated but, with the passage of time and the different charges that are being made, this causes the calibration to be lost.
When we refer to a calibrated battery, we refer to the time it takes to go from 100% to 99% or the time it takes 1% to turn off . In this way, when this is lost, it can become unbalanced by up to 5% or more, this means that the mobile phone can turn off even if it has 5% or 10% charge and go down in just minutes or seconds from 100% to 95 or 90%.
This ends up causing problems that eventually break down the battery life, making all this a problem for users. But, as every process has both its advantages and disadvantages, which we will show you below:
Advantages
Among the main advantages offered by this process we can find the following:
- It will help you offer the actual percentage of your battery.
- It will increase battery life.
- It will improve Smartphone performance.
- You will avoid sudden blackouts.
Disadvantages
As we have said before, every process has its pros and cons and as you can see this is not the case. That’s why here are some reasons why you should not calibrate your iPhone cell phone battery.
- When you get good results it will cause it to constantly perform what can cause battery damage.
- It will only fix the battery for a while short , especially when the battery is old.
- It is not a miracle method.
- If you do the wrong calibration procedure you can cause damage like battery swelling, very slow charging, battery overheating.
- Stagnation at a low charge percentage.
How to calibrate the iPhone battery and make it last longer?
If you are having problems with charging your iPhone , this may be due to the fact that it has been uncalibrated. If this is so, the safest thing is that your device turns off unexpectedly, the percentage of the battery goes down very quickly, or when it is at 5% or 10% it turns off . If you present some of these failures you can perform this procedure to try to recover the battery performance and make it last much longer
In order to calibrate your iPhone’s battery, just follow these steps:
- The first thing will be to charge the Smartphone until it appears on the screen that the charge has reached 100%.
- When this percentage has been reached we disconnect it from the charger and use it as every day until its battery is exhausted. It does not matter if the mobile is used more than the other days or Likewise, the goal is to make the device shut down on its own when downloading .
- When the terminal is off, we must leave it without charging for about 6 to 8 hours .
- Once this period of time has passed, we reconnect the mobile phone to the charger and leave it plugged in for 6 to 8 hours . During all this time it is recommended not to use the mobile phone, as well as to place it in airplane mode.
- When the charging time has elapsed the following will be to disconnect it from the charger and restart the device, for them the sleep and start button will be used during A few seconds for this to take place. After a few seconds the Apple logo will appear and the whole process will be finished, you just have to wait for the phone to turn on and you can start using it normally.
What are the reasons why a battery is descaled? Tips to last longer
It is almost impossible to prevent a battery of a mobile phone from descaling , as every electronic accessory suffers wear and tear that makes its operation deteriorate. In the case of batteries, their percentage of charge is measured based on algorithms that are within the mobile operating system and their operation is related to different factors.
Some of the reasons why mobile devices are uncalibrated are due to having the device longer than it should be connected to the charger, that is, it reaches 100% and continues plugged in which may cause to raise the temperature more than indicated. If this happens it is basically causing a degradation in the battery thus causing it to be uncalibrated .
Another factor that can affect the performance of the stack is fast charges , these significantly increase degradation . Therefore, using wireless charges is not recommended , always try to use normal charges so take a little longer.
Avoid placing the Smartphone in hot places, with sunshine or places where it is tight, this could cause the equipment to overheat and cause its temperature to increase greatly which can cause a greater degradation in the battery causing its performance to decrease.
These are some of the reasons that can cause the battery of the iPhone or any other mobile device to be uncalibrated. Therefore, it is recommended to calibrate it from time to time but, you should keep in mind that doing this procedure very often can significantly affect the life of your equipment. In new equipment it is recommended to do this after 6 months of use .